Mean Machine

  • Mean Machine MM Amplifiers
  • Mean Machine MM Amplifiers
  • Mean Machine MM Amplifiers
 
MEAN MACHINE (MM) - NEW FOR 2018
The MEAN MACHINE car audio amplifier is not for the meek. We call it a mean machine, because it offers the biggest power in the line - up to 4000 MAXX watts of output in a single MM4020.1D amplifier.

With the Mean Machine line, Autotek engineers have made a concerted effort to develop technology that delivers high powered music. The MM line powers the music with low output distortion. Additionally, low-noise electronic crossovers direct just the right amount of critical midrange and high frequency information to the speakers. This same crossover also controls the most critical low frequencies sent to larger speakers suited for bass and sub-bass audio reproduction.
 
FACTORY INTEGRATION
High level inputs on the Autotek full range models easily tie into OEM (factory) audio systems that do not offer RCA output. A simple connector is included to make installations very simple.
 
ALL AUTOTEK MEAN MACHINE CAR AUDIO AMPLIFIERS FEATURE:
  • ROAD WORTHY™ TCID (Twin Coil Isolation Design) and PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
  • High energy PWM (Pulse Width Modulated) power supply provides MAXXimum power with minimal electrical impact
  • Class A/B amplifiers have larger heatsinks with very musical bass while the Class D develop even more power with efficient circuitry in a smaller footprint for the delivered power
  • D-Class mono subwoofer amplifiers include bass remote
 
Autotek amplifiers are designed to integrate into any system; they perform at their best when coupled with Autotek speakers. Check out the full line to integrate in your build.

MM1020.4 Amplifier

« Previous Next »
Autotek MEAN MACHINE car audio amplifier

More Views

Loading product images, please wait...
  • Autotek MEAN MACHINE car audio amplifier

MM1020.4 Amplifier

Be the first to review this product

Part#: MM1020.4

Details:

Autotek MM1020.4 MEAN MACHINE 1000 Watt 4 Channel Amplifier Bridgeable Car Audio Amp
$179.99

http://autotekcaraudio.com/mm1020-4/

Details

Description
Autotek MEAN MACHINE series of car audio amplifiers bring extreme power with PRO-FI™ High Speed MOSFETS and high sound quality with minimum distortion levels. The MM1020.4 features 1000 watts of power in a bridgeable 4 channel Class A/B amplifier with larger heatsink providing very musical bass with dramatically reduced noise. The amplifier can be run from the "output" RCA connections which minimize the need for additional cables running the length of the vehicle.

Category: Mean Machine
SKU: 806576228110
Part #: MM1020.4

Specifications
  • Class
    Class A/B
  • Variable Voltage
    6V - 0.2V
  • Signal to Noise
    >90dB
  • Frequency Response
    30Hz - 12kHz
  • Crossover
    CH1 & CH2
    Switchable
    FULL / HPF

    CH3 & CH4
    Switchable
    HPF / LPF / FULL
  • Variable High Pass Crossover 12dB per Octave
    CH1 & CH2
    Switchable
    FULL / HPF
    60Hz - 1.2kHz

    CH3 & CH4
    Switchable
    HPF / LPF / FULL
    HPF
    60Hz - 1.2kHz
  • Variable Low Pass Crossover 12dB per Octave
    CH3 & CH4
    Switchable
    HPF / LPF / FULL
    LPF
    30Hz-250Hz
  • Tone Control/Parametric EQ
    Built-in bass control
  • Bass Boost
    Switchable
    12 / 6 / 0dB
  • Power @ 1 Ohm
    N/A
  • Power @ 2 Ohms
    4 x 250 Watts
  • Power @ 4 Ohms
    4 x 125 Watts
  • Mono Bridged @ 4 Ohms
    2 x 500 Watts
  • Total Channels
    4
  • Audio Inputs
    RCA
  • Audio Outputs
    RCA
  • Power Terminal 12v/GND
    4 AWG
  • Speaker Terminal Wire Gauge
    8 AWG
  • Fusing
    15Ax2
  • Total Harmonic Distortion (THD)
    <0.05%


Features & Benefits
  • Low Noise Pre-Amplifier Circuitry
    Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
  • RCA Inputs
    RCA inputs and outputs provide the highest sound quality connection
  • Hi Level Inputs
    High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
  • Operation Mode
    4 channel operation mode allows either stereo or mono bridged operation
  • Crossover Type
    Switched
    FULL / LPF / HPF for complete control of amplifier signal which is essential when using two or more amplifiers
  • Electronic Equalizer
    Electronic equalizer provides control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subwoofers
  • Class / Topology
    Class A/B amplifiers have larger heatsinks with very musical bass
  • Output Device Technology
    MEAN MACHINE'S ROAD WORTHY™ TCID (Twin Coil Isolation Design) and PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
  • Heat Sink
    Heavy-duty aluminum alloy heatsink with illuminated connectors provide a blue wash of light from the heatsink underside
  • Power Supply
    High energy PWM (Pulse Width Modulated) power supply provides MAXXimum power with minimal electrical impact
  • Output Connections
    Nickel-plated brass connectionwith hex set screw terminals allow for secure connection and resist erosion
  • Connection Type
    Angled, Allen Key connectors provide easy access for hand tools allowing a quick and secure connection
  • Full-Range RCA Outputs for Signal Pass Through
    Full-range signal pass through output allows additional amplifiers to be run from the "output" RCA connections which minimize the need for additional cables running the length of the vehicle. This can dramatically minimize noise.
  • LED System Protection Circuitry Diagnostics
    Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel



Write Your Own Review

Only registered users can write reviews. Please, log in or register