SUPER SPORT

  • Street Machine SMA Amplifiers
 
SUPER SPORT Amplifiers

The Autotek SUPER SPORT line of car audio amplifiers is designed with that throwback feel you get when you see a classic SUPER SPORT lined up at a car show. Powerful and created to matter to those that own them and those that hope to someday. The Autotek SS amplifiers deliver incredible power with plenty of features to make a simple installation or a very elaborate, multi-amp installation.

 

SUPER SPORTS amplifiers are available in two channels, four channels and mono amplifiers. The two and four channels all offer ‘High Level’ inputs, which allows for simple wiring to existing speakers. Beware, there are some real MONSTERS under the hoods of the SS line including The SS 5000.1 – 5000 watts of raw power into 1 ohm. Once you feel that kind of power under the hood, you will never settle for an underpowered audio engine again.

 

Autotek amplifiers are designed to integrate into any system; they perform at their best when coupled with Autotek speakers. Check out the full line to integrate in your SUPER SPORT build.

SS1800.1D SS Amplifier

« Previous Next »
Autotek Car Amplifier

More Views

Loading product images, please wait...
  • Autotek Car Amplifier
  • Autotek Car Amplifier
  • Autotek Car Amplifier

SS1800.1D SS Amplifier

Be the first to review this product

Part#: SS1800.1D

Details:

Autotek SUPER SPORT Series 1800 watt Class-D subwoofer car audio amplifier with bass remote

Regular Price: $249.99

Special Price: $91.99

http://autotekcaraudio.com/ss1800-1d/

Details

Description
Autotek SUPER SPORT Series is designed with Class-D technology to deliver high power in an efficient heatsink specifically designed to power a mono subwoofer system. Features include built-in electronic crossovers and a bass remote. 1800 watt mono Class-D subwoofer car audio amplifier with bass remote

Category: MaxxFactory Products
SKU: 806576226581
Part #: SS1800.1D

Specifications
  • Class
    Class D
  • Variable Voltage
    6 - 0.2V
  • Signal to Noise
    >98dB
  • Frequency Response
    20Hz-250Hz
  • Crossover Type
    Variable Electronic 12dB Per Octave
  • Low Pass Crossover:
    12dB Per Octave:

    40Hz-300Hz
  • Tone Control
    Bass EQ @45Hz
  • Bass Boost
    Variable 0 - 12dB
  • Subsonic Filter
    10 Hz - 40 Hz
  • Phase Shift
    No
  • Power Output @ 1 Ohm:
    1 x 1800W
  • Power Output @ 2 Ohms:
    1 x 900W
  • Power Output @ 4 Ohms
    1 x 450W
  • Total Channels
    1
  • Audio Inputs:
    RCA Jack
  • Audio Outputs:
    Yes
  • Power Terminal:
    12v/GND

    8 ga
  • Speaker Terminal Wire Gauge
    16 ga
  • Fusing
    35A x 2
  • Dimensions
    10 x 10.25 x 2 in
    25.4x 26 x 5 cm
  • Weight
    6.75 lbs (3.06 kg)


Features & Benefits
  • Pre-Amp Circuitry Low Noise PreAmplifier
    Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
  • Inputs Low voltage RCA Inputs
    Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path
  • Hi Level Inputs No
  • Operation Mode 1
    Mono Only
  • Crossover / Signal Shaping Electronic
    Whether variable or switched, all Autotek amplifier incorporate internal 12dB crossovers networks allow for audiophile control of equalization circuits
  • Equalizer Electronic
    Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier
  • Class / Topology Class D
    Very efficient D-Class to drive additional power to subwoofer frequencies while remaining a small footprint
  • Output Devices Technology Pro- Fi™
    Pro- Fi™ High Speed MOSFET’s components maximize power efficiency while improving sound quality and minimizing distortion
  • Heat Sink Sound Shield™
    Sound Shield™ Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool while shielding music from distortions that can be caused by heat
  • Power Supply PWM Power Supply
    High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system
  • Bass RemoteIncluded
    Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
  • Output Connections Nickel Plated
    Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion
  • Connections Type Screw Down Connectors
    Easy access for hand tool allowing a quick and secure connection
  • Signal Pass Through RCA Outputs - Full Range
    Daisy chain multiple amplifier to eliminate additional signal cables from the source unit
  • Diagnostics LED System Protection Circuitry
    Monitor overload and speaker short protection with lighted indicators on the amplifier end panel



Write Your Own Review

Only registered users can write reviews. Please, log in or register

Maxxsonics Factory Outlet Now Open
Maxxsonics Factory Outlet Now Open