Mean Machine

  • Mean Machine MM Amplifiers
  • Mean Machine MM Amplifiers
  • Mean Machine MM Amplifiers
The MEAN MACHINE car audio amplifier is not for the meek. We call it a mean machine, because it offers the biggest power in the line - up to 4000 MAXX watts of output in a single MM4020.1D amplifier.

With the Mean Machine line, Autotek engineers have made a concerted effort to develop technology that delivers high powered music. The MM line powers the music with low output distortion. Additionally, low-noise electronic crossovers direct just the right amount of critical midrange and high frequency information to the speakers. This same crossover also controls the most critical low frequencies sent to larger speakers suited for bass and sub-bass audio reproduction.
High level inputs on the Autotek full range models easily tie into OEM (factory) audio systems that do not offer RCA output. A simple connector is included to make installations very simple.
  • ROAD WORTHY™ TCID (Twin Coil Isolation Design) and PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
  • High energy PWM (Pulse Width Modulated) power supply provides MAXXimum power with minimal electrical impact
  • Class A/B amplifiers have larger heatsinks with very musical bass while the Class D develop even more power with efficient circuitry in a smaller footprint for the delivered power
  • D-Class mono subwoofer amplifiers include bass remote
Autotek amplifiers are designed to integrate into any system; they perform at their best when coupled with Autotek speakers. Check out the full line to integrate in your build.

MMA2000.2 Amplifier

« Previous Next »

More Views

Loading product images, please wait...

MMA2000.2 Amplifier

Be the first to review this product

Availability: Discontinued

Part#: MMA2000.2


Autotek Mean Machine 2000 watt two channel car audio amplifier

Regular Price: $239.99

Special Price: $199.99

Scroll down for product details


Autotek Mean Machine with Pro- Fi™ High Speed MOSFETS and ROAD WORTHY™ technology power supply's deliver big power. Features include built-in electronic crossovers and high-level inputs. 2000 watt two channel car audio amplifier

Category: Mean Machine
SKU: 806576224211
Part #: MMA2000.2

  • Class
    Class A/B
  • Variable Voltage
    0.2V - 6V
  • Signal to Noise
  • Frequency Response
    30Hz - 12KHz
  • Crossover Type
    Variable Electronic
  • High Pass Crossover12dB Per Octave
  • Low Pass Crossover12dB Per Octave
    30Hz - 250Hz
  • Tone Control
    Built-in bass control
  • Bass Boost
  • Subsonic Filter
  • Phase Shift
  • Power Output @ 1 Ohm:
  • Power Output @ 2 Ohms:
    2 x 1000 W
  • Power Output @ 4 Ohms
    2 x 500 W
  • Mono Bridged @ 4-Ohms
    1 x 2000 W
  • Total Channels
  • Audio Inputs:
    Unbalanced Inputs (RCA)
  • Audio Outputs:
    Line Output (RCA)
  • Power Terminal:

    4 ga
  • Speaker Terminal Wire Gauge
    10 ga
  • Fusing
    20A x 2
  • Dimensions
    15.88 x 11.19 x 3.38 in
    40.3 x 28.4 x 8.58 cm
  • Weight
    7.25 lbs (3.2 kg)

Features & Benefits
  • Pre-Amp Circuitry Low Noise PreAmplifier
    Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
  • Inputs Nickel-Plated
    Nickel Plated Brass Connection with Hex Set Screw terminals allow for secure connection and resist erosion
  • Hi Level Inputs Yes
    Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power
  • Operation Mode Two channel and bridged mono operation
    Flexible installation allows this amplifier to run in two channel or bridged mono mode.
  • Crossover / Signal Shaping Electronic
    Fully Adjustable 12dB Crossovers
  • Equalizer Electronic
    Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers.
  • Class / Topology Class A/B
    Designed to be high sound quality with minimal distortion
  • Output Devices Technology Pro-Fi™ High Speed MOSFETS Circuit
    Maximizing power efficiency while improving sound quality and minimizing distortion
  • Heat Sink Aluminum
    Heavy duty aluminum alloy heat-sink & Lighted connectors and blue wash of light from the underside of the heat sink
  • Power Supply PWM Power Supply
    High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system
  • Output Connections Nickel Plated
    Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion
  • Connections Type Allen Key Connectors
    Angled connection for easy access for hand tool allowing a quick and secure connection
  • Signal Pass ThroughYES - Full Range
    Allows additional amplifiers to be run from the "output" RCA connections which will minimize the need for additional cables running the length of the vehicle. This can dramatically minimize noise.
  • Diagnostics Yes
    3-Way System Protection circuitry (thermal, slipping, and speaker short protection)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Maxxsonics Factory Specials
Maxxsonics Factory Specials