• Super Sport SS Amplifiers
SUPER SPORT (SS) Amplifiers
The Autotek SUPER SPORT line of car audio amplifiers is designed with that throwback feel you get when you see a classic SUPER SPORT lined up at a car show. Powerful and created to matter to those that own them and those that hope to someday. The Autotek SS amplifiers deliver incredible power with plenty of features to make a simple installation or a very elaborate, multi-amp installation.

SUPER SPORT amplifiers are available in two channels, four channels and mono amplifiers. Beware, there are some real MONSTERS under the hoods of the SS line including the SS 5000.1 – 5000 watts of raw power into 1 ohm. Once you feel that kind of power under the hood, you will never settle for an underpowered audio engine again.
High level inputs on the Autotek full-range models easily tie into OEM (factory) audio systems that do not offer RCA output. A simple connector is included to make installations very simple.
  • ROAD WORTHY™ TCID (Twin Coil Isolation Design) and PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
  • High energy PWM (Pulse Width Modulated) power supply provides MAXXimum power with minimal electrical impact
  • Class A/B amplifiers have larger heatsinks with very musical bass while the Class D develop even more power with efficient circuitry in a smaller footprint for the delivered power
  • D-Class mono subwoofer amplifiers include bass remote
Autotek amplifiers are designed to integrate into any system; they perform at their best when coupled with Autotek speakers. Check out the full line to integrate in your build.

SS2500.2 SS Amplifier

« Previous Next »
Autotek Car Amplifier

More Views

Loading product images, please wait...
  • Autotek SUPER SPORT car audio amplifier
  • Autotek Car Amplifier
  • Autotek Car Amplifier

SS2500.2 SS Amplifier

Be the first to review this product

Availability: Out of stock

Part#: SS2500.2


Autotek SUPER SPORT Series 2500 watt two channel car audio amplifier


Autotek SUPER SPORT Series delivers huge power in an efficient heatsink. Features include built-in electronic crossovers and high-level inputs. 2500 watt two channel car audio amplifier

SKU: 806576226529
Part #: SS2500.2

  • Class
    Class A/B
  • Variable Voltage
    6 - 0.2V
  • Signal to Noise
  • Frequency Response
  • Crossover Type
    Selectable FULL - LPF - HPF
  • Hi Pass Crossover:
    12dB Per Octave:

  • Low Pass Crossover:
    12dB Per Octave:

  • Tone Control
    Bass EQ @45Hz
  • Bass Boost
    Selectable 0 / 6 / 12dB
  • Power Output @ 1 Ohm:
  • Power Output @ 2 Ohms:
    2 x 1250 W
  • Power Output @ 4 Ohms
    2 x 625 W
  • Mono Bridged @ 4-Ohms
    1 x 2500 W
  • Total Channels
  • Audio Inputs:
    RCA Jack
  • Audio Outputs:
  • Power Terminal:

    8 ga
  • Speaker Terminal Wire Gauge
    16 ga
  • Fusing
    40A x 1
  • Dimensions
    10.75 x 10.25 x 2 in
    27 x 26 x 5 cm
  • Weight
    5.1 lbs (2.31 kg)

Features & Benefits
  • Pre-Amp Circuitry Low Noise PreAmplifier
    Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
  • Inputs Low voltage RCA Inputs
    Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path
  • Hi Level Inputs Yes, small connecting adapter
    Easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
  • Operation Mode 3
    Stereo, Bridged Mono or Stereo/Bridged Mono Simultaneously
  • Crossover / Signal Shaping Electronic
    Internal 12dB crossovers networks allow for audiophile control of equalization circuits
  • Equalizer Electronic
    Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier
  • Class / Topology Class A/B
    High sound quality circuit that allows amplifier to develop high levels of power with minimal distortion
  • Output Devices Technology Pro- Fi™
    Pro- Fi™ High Speed MOSFET’s components maximize power efficiency while improving sound quality and minimizing distortion
  • Heat Sink Sound Shield™
    Sound Shield™ Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool while shielding music from distortions that can be caused by heat
  • Power Supply PWM Power Supply
    High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system
  • Output Connections Nickel Plated
    Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion
  • Connections Type Screw Down Connectors
    Easy access for hand tool allowing a quick and secure connection
  • Signal Pass Through No
  • Diagnostics LED System Protection Circuitry
    Monitor overload and speaker short protection with lighted indicators on the amplifier end panel

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Maxxsonics Factory Specials
Maxxsonics Factory Specials