« PreviousNext »
More Views
Loading product images, please wait...
https://autotekcaraudio.com/ta2050-1/
Details
Description
Autotek TA Series is designed with Class-D technology to deliver high power in an efficient heatsink specifically designed to power a mono subwoofer system. Features include built-in electronic crossovers and a bass remote. 1000 watt mono Class-D subwoofer car audio amplifier with bass remote.
Autotek TA Series is designed with Class-D technology to deliver high power in an efficient heatsink specifically designed to power a mono subwoofer system. Features include built-in electronic crossovers and a bass remote. 1000 watt mono Class-D subwoofer car audio amplifier with bass remote.
Category: MaxxFactory Products
SKU: 806576225317
Part #: TA2050.1
Specifications
SKU: 806576225317
Part #: TA2050.1
Specifications
- Class
Class D - Variable Voltage
11-15VDC - Signal to Noise
>98dB - Frequency Response
20Hz-250Hz - Crossover Type
Variable Electronic 12dB Per Octave - Low Pass Crossover:
12dB Per Octave:
50Hz-250Hz - Tone Control
Built-in bass control - Bass Boost
0-18dB - Subsonic Filter
20Hz-50Hz - Phase Shift
0-180 Degrees - Power Output @ 1 Ohm:
1 x 2000W - Power Output @ 2 Ohms:
1 x 1500W - Power Output @ 4 Ohms
1 x 800W - Mono Bridged @ 4-Ohms
N/A - Total Channels
1 - Audio Inputs:
Unbalanced Inputs (RCA) - Audio Outputs:
Line Output (RCA) - Power Terminal:
12v/GND
4 ga - Speaker Terminal Wire Gauge
8 ga - Fusing
40A x 2 - Dimensions
14.7 x 11.4 x 4 in
37.5 x 29 x 10 cm - Weight
7 lbs (3.1 kg)
Features & Benefits
- Pre-Amp Circuitry Low Noise PreAmplifier Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
- Inputs Low voltage RCA Inputs Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path
- Operation Mode 1 Mono Only
- Crossover / Signal Shaping Electronic Fully Adjustable 12dB Crossovers
- Equalizer Electronic Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers.
- Class / Topology Class D Very efficient D-Class to drive additional power to subwoofer frequencies while remaining a small footprint
- Output Devices Technology Pro- Fi™ Pro- Fi™ High Speed MOSFET’s components maximize power efficiency while improving sound quality and minimizing distortion
- Heat Sink Sound Shield™ Sound Shield™ Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool while shielding music from distortions that can be caused by heat
- Power Supply PWM Power Supply High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system
- Bass Remote Included Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
- Output Connections Nickel Plated Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion
- Connections Type Screw Down Connectors Easy access for hand tool allowing a quick and secure connection
- Diagnostics LED System Protection Circuitry Monitor overload and speaker short protection with lighted indicators on the amplifier end panel
